Cisco > Routers > ASR 9000 Router > ASR 9000 Common Equipment > A9K-RSP880-SE

OverviewCisco A9K-RSP880-SE ASR 9000 Route Switch Processor 880 RSP-880
Mfr. Part Number:

A9K-RSP880-SE

Manufacturer: Cisco
Description: Cisco A9K-RSP880-SE ASR 9000 Route Switch Processor 880 for Service Edge 32G
Full Description: Cisco A9K-RSP880-SE ASR 9000 Route Switch Processor 880 (RSP 880) for Service Edge 32G with 32GB ECC-protected DRAM, (2) SSD 32GB Solid-state Disks, 8-GB Embedded USB (USB 2.0 Type A receptacle), (2) Independent Clock source Connections; IEEE 1588 support: Copper 10-Mbps and 100-Mbps RJ-45 Ethernet Port; GPS: ToD (RS-422 and RS-232), 1-pps RS-422 or 1.0/2.3 50-ohm RF connector, 10-MHz in/out 1.0/2.3 50-ohm RF connector; (2) 100/1000BASE-T (RJ-45) LAN Management Ports, (1) Console Port, (1) Auxiliary Port; For the Cisco ASR 9010, ASR 9006, and ASR 9904 Routers
UPC / GTIN: 882658748080
Status: Current Product
Inventory & PricesPLCH is Not Authorized Distributor of this product
Condition:

SOP (Surplus in Open Packaging)

Warranty:
Manufacturer's Warranty & Support DO NOT apply.
Availability:
0 in stock 0 available for pre-order
Shipping Date:
 -  -
Estimated Value: $92,000.00
Your Price: $21,157.00
Quantity:
 
Image
A9K-RSP880-SE
Disclaimer
PLC Hardware (PLCH) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens or any other Manufacturers. PLCH is NOT Authorized Dealer of this product. The product may be of older version, date codes or design than that available from authorized dealers. As PLCH is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. PLCH sells SURPLUS and USED equipment ONLY and DOES NOT sell SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining a proper license from the manufacturer. PLCH makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. PLCH also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from Original Manufacturer, its distributors, or any other source. PLCH also makes no representations as to your right to install any such software or firmware on the product. PLCH will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that PLCH DOES NOT provide any software, firmware, operating system or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance and upgrades are subject to applicable manufacturer's Licensing Agreement or similar document.
 
Specs & Technical Data
Specifications: Supports high-density 100 Gigabit Ethernet line cards and provides backward compatibility with the Cisco ASR 9000 Series second family of line cards. Designed to accommodate new programmable deployment models and convergence of Layer 2 and Layer 3 services, as required by wireline, data-center-interconnect (DCI), and Radio Access Network (RAN) aggregation applications. 
Miscellaneous: Supported Software Release: Cisco IOS XR Software Release 5.3.0 and later. 
Special Offer
IPS-4240-K9
$201.63
15454-AIC=
$24.82
AIM-ATM=
$15.51