OverviewCisco NIM-2FXO 2-Port FXO Analog Voice Network Interface Module
Mfr. Part Number:

NIM-2FXO

Manufacturer: Cisco
Description: Cisco NIM-2FXO 2-Port FXO Analog Voice/Fax Network Interface Module
Full Description: Cisco NIM-2FXO Universal Analog Voice/Fax Network Interface Module with 2-Port FXO (foreign exchange office) for Cisco 4000 Series Routers; Supports Supports both ground start and loop start modes; Provides Call Detail Record (CDR) information; Overload Protection; Support for interworking with Cisco Unified Communications Manager (Skinny Client Control Protocol [SCCP]), H.323, Session Initiation Protocol (SIP) and Media Gateway Control Protocol (MGCP) 1.0, Cable detection
Status: Current Product
Inventory & PricesPLCH is Not Authorized Distributor of this product
Condition:

SSP (Surplus Sealed Pre-owned)

Warranty:
Manufacturer's Warranty & Support DO NOT apply.
Availability:
0 in stock 0 available for pre-order
Shipping Date:
 -  -
Estimated Value: $575.00
Your Price: $337.00
Quantity:
 
Image
NIM-2FXO
Disclaimer
PLC Hardware (PLCH) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens or any other Manufacturers. PLCH is NOT Authorized Dealer of this product. The product may be of older version, date codes or design than that available from authorized dealers. As PLCH is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply. PLCH sells pre-owned SURPLUS and USED equipment ONLY and DOES NOT sell SOFTWARE or FIRMWARE licenses. Some hardware products may contain software and firmware and may not be legally operated without first obtaining a proper license from the manufacturer. PLCH makes no representation as to whether a product will or will not have software or firmware and, if it does, whether the software or firmware is the revision level that you need for your application. PLCH also makes no representations as to your ability or right to download or otherwise obtain software or firmware for the product from Original Manufacturer, its distributors, or any other source. PLCH also makes no representations as to your right to install any such software or firmware on the product. PLCH will not obtain or supply software or firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing software or firmware. Customer acknowledges and agrees that PLCH DOES NOT provide any software, firmware, operating system or right-to-use licenses with the products it sells. Customers understand and agree that proper software (firmware) licensing, maintenance and upgrades are subject to applicable manufacturer's Licensing Agreement or similar document.
 
Specs & Technical Data
Specifications: Supported Standards: TIA-968-B (USA), CS-03 (Canada), AS/CA S002 (Australia), AS/CA S003 (Australia), PTC220 (New Zealand), TBR 21 (CE countries); Supported Cisco IOS Releases: XE3.13.4, XE3.14.3, XE3.15.1, XE3.16 and above; The module can be inserted into the NIM slot on the supported Cisco 4000 Series ISRs without powering off the router. Port should be connected with a straight-through 2-wire Cable. 
Miscellaneous: The FXO port is used to connect to PBX or key systems, or to provide off-premises connections to the public switched telephone network (PSTN). It supports battery reversal detection and caller ID. This VIC can be software configured to work in all countries. lt is also used to connect to analog Centralized Automatic Message Accounting (CAMA) trunks to provide dedicated E-911 service (North America only). 
Special Offer
AIM-ATM=
$15.51
15454-AIC=
$24.82